The latest version of OptTracer is currently only compatible with DJI UAV remote controllers. If your flight platform is not DJI UAV, please contact us to obtain the universal Android version of OptTracer.

No, OptTracer is displayed through the DJI remote controller's Pilot 2 App. Simply open the remote controller to use it.

Please click the switch below the project name setting box to open the floating window display.

If you enable the UAV's RTK function, you need to wait for the RTK status to converge before using it. The convergence corresponds to a status number of 50.

FPS error refers to the percentage error between the actual time difference and the ideal time difference between two frames of data. For example, if you set the FPS to 50, the ideal frame time difference should be 20 ms. If the actual time difference between the captured frames is 21 ms, it represents a 5% FPS error.

Currently, it is not supported.

There may be an existing project with the same name. It is recommended to choose a different project name.

OptTracer has a delay of about 1 minute to start. Please be patient and wait for the internal initialization of the device to complete.

In Free Mode, the remote controller can control the movement of the gimbal freely.

This feature will be available in future firmware updates. Please contact us or our authorized distributors for the latest information.